Add support for Spansion S25FL2 chips
Add...
- S25FL204K
- S25FL208K
- S25FL216K (same ID as S25FL116K)
Corresponding to flashrom svn r1691.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
diff --git a/flashchips.c b/flashchips.c
index e8d8690..47b5dd0 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -8484,6 +8484,109 @@
},
{
+ .vendor = "Spansion",
+ .name = "S25FL204K",
+ .bustype = BUS_SPI,
+ .manufacture_id = SPANSION_ID,
+ .model_id = SPANSION_S25FL204,
+ .total_size = 512,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_WREN,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers = {
+ {
+ .eraseblocks = { {4 * 1024, 128} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {64 * 1024, 8} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { { 512 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { { 512 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_default_bp3,
+ .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */
+ .write = spi_chip_write_256,
+ .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "Spansion",
+ .name = "S25FL208K",
+ .bustype = BUS_SPI,
+ .manufacture_id = SPANSION_ID,
+ .model_id = SPANSION_S25FL208,
+ .total_size = 1024,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_WREN,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers = {
+ {
+ .eraseblocks = { {4 * 1024, 256} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {64 * 1024, 16} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { { 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { { 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_default_bp3,
+ .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */
+ .write = spi_chip_write_256,
+ .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "Spansion",
+ .name = "S25FL116K/S25FL216K",
+ .bustype = BUS_SPI,
+ .manufacture_id = SPANSION_ID,
+ .model_id = SPANSION_S25FL216,
+ .total_size = 2048,
+ .page_size = 256,
+ /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (S25FL116K only) */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers = {
+ {
+ .eraseblocks = { {4 * 1024, 512} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {64 * 1024, 32} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { { 2048 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { { 2048 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_default_bp3,
+ .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */
+ .write = spi_chip_write_256,
+ .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */
+ .voltage = {2700, 3600},
+ },
+
+ {
.vendor = "SST",
.name = "SST25LF040A",
.bustype = BUS_SPI,
diff --git a/flashchips.h b/flashchips.h
index a35b54f..fa5033f 100644
--- a/flashchips.h
+++ b/flashchips.h
@@ -540,7 +540,9 @@
#define SPANSION_S25FL016A 0x0214
#define SPANSION_S25FL032A 0x0215 /* Same as S25FL032P, but the latter supports EDI and CFI */
#define SPANSION_S25FL064A 0x0216 /* Same as S25FL064P, but the latter supports EDI and CFI */
-
+#define SPANSION_S25FL204 0x4013
+#define SPANSION_S25FL208 0x4014
+#define SPANSION_S25FL216 0x4015 /* Same as S25FL216K, but the latter supports OTP, 3 status regs, quad I/O, SFDP etc. */
/*
* SST25 chips are SPI, first byte of device ID is memory type, second
* byte of device ID is related to log(bitsize) at least for some chips.