serprog: move the macro list to its own header file
Corresponding to flashrom svn r1617.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
diff --git a/serprog.h b/serprog.h
new file mode 100644
index 0000000..8d11772
--- /dev/null
+++ b/serprog.h
@@ -0,0 +1,24 @@
+/* According to Serial Flasher Protocol Specification - version 1 */
+#define S_ACK 0x06
+#define S_NAK 0x15
+#define S_CMD_NOP 0x00 /* No operation */
+#define S_CMD_Q_IFACE 0x01 /* Query interface version */
+#define S_CMD_Q_CMDMAP 0x02 /* Query supported commands bitmap */
+#define S_CMD_Q_PGMNAME 0x03 /* Query programmer name */
+#define S_CMD_Q_SERBUF 0x04 /* Query Serial Buffer Size */
+#define S_CMD_Q_BUSTYPE 0x05 /* Query supported bustypes */
+#define S_CMD_Q_CHIPSIZE 0x06 /* Query supported chipsize (2^n format) */
+#define S_CMD_Q_OPBUF 0x07 /* Query operation buffer size */
+#define S_CMD_Q_WRNMAXLEN 0x08 /* Query Write to opbuf: Write-N maximum length */
+#define S_CMD_R_BYTE 0x09 /* Read a single byte */
+#define S_CMD_R_NBYTES 0x0A /* Read n bytes */
+#define S_CMD_O_INIT 0x0B /* Initialize operation buffer */
+#define S_CMD_O_WRITEB 0x0C /* Write opbuf: Write byte with address */
+#define S_CMD_O_WRITEN 0x0D /* Write to opbuf: Write-N */
+#define S_CMD_O_DELAY 0x0E /* Write opbuf: udelay */
+#define S_CMD_O_EXEC 0x0F /* Execute operation buffer */
+#define S_CMD_SYNCNOP 0x10 /* Special no-operation that returns NAK+ACK */
+#define S_CMD_Q_RDNMAXLEN 0x11 /* Query read-n maximum length */
+#define S_CMD_S_BUSTYPE 0x12 /* Set used bustype(s). */
+#define S_CMD_O_SPIOP 0x13 /* Perform SPI operation. */
+#define S_CMD_S_SPI_FREQ 0x14 /* Set SPI clock frequency */