flashchips: Add Puya PY25Q..H family up to PY25Q128H
These are all the 3.3V parts of the family with only 24-bit
addresses (3BA). First two (PY25Q40HB, PY25Q80HB) don't have
a configuration register and no WPS bit. From PY25Q64HA on,
the voltage range starts from 2.7V (instead of the 2.3V they
had before). There are versions with fixed quad-enable bits.
Alas, they use different IDs, so we need duplicate database
entries again.
Datasheets used:
https://www.puyasemi.com/download_path/%E6%95%B0%E6%8D%AE%E6%89%8B%E5%86%8C/Flash/PY25Q80HB_Datasheet_V1.7.pdf
https://www.puyasemi.com/download_path/%E6%95%B0%E6%8D%AE%E6%89%8B%E5%86%8C/Flash/PY25Q16HB_Datasheet_V1.6.pdf
https://www.puyasemi.com/download_path/%E6%95%B0%E6%8D%AE%E6%89%8B%E5%86%8C/Flash/PY25Q32HB_Datasheet_V1.7.pdf
https://www.puyasemi.com/download_path/%E6%95%B0%E6%8D%AE%E6%89%8B%E5%86%8C/Flash/PY25Q64HA_Datasheet_V1.9.pdf
https://www.puyasemi.com/download_path/%E6%95%B0%E6%8D%AE%E6%89%8B%E5%86%8C/Flash/PY25F64HA_Datasheet_V1.1.pdf
https://www.puyasemi.com/download_path/%E6%95%B0%E6%8D%AE%E6%89%8B%E5%86%8C/Flash/PY25Q128HA_Datasheet_V2.0.pdf
https://www.puyasemi.com/download_path/%E6%95%B0%E6%8D%AE%E6%89%8B%E5%86%8C/Flash/PY25R128HA_Datasheet_V1.0.pdf
https://www.puyasemi.com/download_path/%E6%95%B0%E6%8D%AE%E6%89%8B%E5%86%8C/Flash/PY25F128HA_Datasheet_V1.2.pdf
Change-Id: I9f97e686604cf722af36c799dc0c5c1e7e942a26
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.sourcearcade.org/c/flashprog/+/295
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
diff --git a/flashchips.c b/flashchips.c
index 480c506..fbc5b9e 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -15802,6 +15802,466 @@
},
{
+ .vendor = "Puya",
+ .name = "PY25Q40HB",
+ .bustype = BUS_SPI,
+ .manufacture_id = PUYA_ID,
+ .model_id = PUYA_PY25Q40H,
+ .total_size = 512,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_EITHER | FEATURE_WRSR_EXT2 | FEATURE_WRSR2 |
+ FEATURE_OTP | FEATURE_QPI_SRP,
+ .dummy_cycles = { .qpi_read_params = { 10, 4, 6, 8 } },
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 128} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 16} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 8} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {512 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {512 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ },
+ },
+ .reg_bits =
+ {
+ .qe = {STATUS2, 1, RW},
+ .srp = {STATUS1, 7, RW},
+ .srl = {STATUS2, 0, RW},
+ .bp = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}},
+ .tb = {STATUS1, 5, RW},
+ .sec = {STATUS1, 6, RW},
+ .cmp = {STATUS2, 6, RW},
+ },
+ .wp_write_cfg = spi_wp_write_cfg,
+ .wp_read_cfg = spi_wp_read_cfg,
+ .wp_get_ranges = spi_wp_get_available_ranges,
+ .decode_range = decode_range_spi25,
+ .printlock = spi_prettyprint_status_register_bp4_srwd,
+ .unlock = spi_disable_blockprotect_bp4_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2300, 3600},
+ .prepare_access = spi_prepare_io,
+ .finish_access = spi_finish_io,
+ },
+
+ {
+ .vendor = "Puya",
+ .name = "PY25Q80HB",
+ .bustype = BUS_SPI,
+ .manufacture_id = PUYA_ID,
+ .model_id = PUYA_PY25Q80H,
+ .total_size = 1024,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_EITHER | FEATURE_WRSR_EXT2 | FEATURE_WRSR2 |
+ FEATURE_OTP | FEATURE_QPI_SRP,
+ .dummy_cycles = { .qpi_read_params = { 10, 4, 6, 8 } },
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 256} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 32} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 16} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {1024 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {1024 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ },
+ },
+ .reg_bits =
+ {
+ .qe = {STATUS2, 1, RW},
+ .srp = {STATUS1, 7, RW},
+ .srl = {STATUS2, 0, RW},
+ .bp = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}},
+ .tb = {STATUS1, 5, RW},
+ .sec = {STATUS1, 6, RW},
+ .cmp = {STATUS2, 6, RW},
+ },
+ .wp_write_cfg = spi_wp_write_cfg,
+ .wp_read_cfg = spi_wp_read_cfg,
+ .wp_get_ranges = spi_wp_get_available_ranges,
+ .decode_range = decode_range_spi25,
+ .printlock = spi_prettyprint_status_register_bp4_srwd,
+ .unlock = spi_disable_blockprotect_bp4_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2300, 3600},
+ .prepare_access = spi_prepare_io,
+ .finish_access = spi_finish_io,
+ },
+
+ {
+ .vendor = "Puya",
+ .name = "PY25Q16HB",
+ .bustype = BUS_SPI,
+ .manufacture_id = PUYA_ID,
+ .model_id = PUYA_PY25Q16H,
+ .total_size = 2048,
+ .page_size = 256,
+ /* Has configuration register that acts like third status register. */
+ .feature_bits = FEATURE_WRSR_EITHER | FEATURE_WRSR_EXT2 | FEATURE_WRSR2 | FEATURE_WRSR3 |
+ FEATURE_OTP | FEATURE_QPI_SRP,
+ .dummy_cycles = { .qpi_read_params = { 10, 4, 6, 8 } },
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 512} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 64} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 32} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {2048 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {2048 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ },
+ },
+ .reg_bits =
+ {
+ .qe = {STATUS2, 1, RW},
+ .srp = {STATUS1, 7, RW},
+ .srl = {STATUS2, 0, RW},
+ .bp = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}},
+ .tb = {STATUS1, 5, RW},
+ .sec = {STATUS1, 6, RW},
+ .cmp = {STATUS2, 6, RW},
+ .wps = {STATUS3, 2, RW}, /* Called configuration register in datasheet. */
+ },
+ .wp_write_cfg = spi_wp_write_cfg,
+ .wp_read_cfg = spi_wp_read_cfg,
+ .wp_get_ranges = spi_wp_get_available_ranges,
+ .decode_range = decode_range_spi25,
+ .printlock = spi_prettyprint_status_register_bp4_srwd,
+ .unlock = spi_disable_blockprotect_bp4_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2300, 3600},
+ .prepare_access = spi_prepare_io,
+ .finish_access = spi_finish_io,
+ },
+
+ {
+ .vendor = "Puya",
+ .name = "PY25Q32HB",
+ .bustype = BUS_SPI,
+ .manufacture_id = PUYA_ID,
+ .model_id = PUYA_PY25Q32H,
+ .total_size = 4096,
+ .page_size = 256,
+ /* Has configuration register that acts like third status register. */
+ .feature_bits = FEATURE_WRSR_EITHER | FEATURE_WRSR_EXT2 | FEATURE_WRSR2 | FEATURE_WRSR3 |
+ FEATURE_OTP | FEATURE_QPI_SRP,
+ .dummy_cycles = { .qpi_read_params = { 10, 4, 6, 8 } },
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 1024} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 128} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 64} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {4096 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {4096 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ },
+ },
+ .reg_bits =
+ {
+ .qe = {STATUS2, 1, RW},
+ .srp = {STATUS1, 7, RW},
+ .srl = {STATUS2, 0, RW},
+ .bp = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}},
+ .tb = {STATUS1, 5, RW},
+ .sec = {STATUS1, 6, RW},
+ .cmp = {STATUS2, 6, RW},
+ .wps = {STATUS3, 2, RW}, /* Called configuration register in datasheet. */
+ },
+ .wp_write_cfg = spi_wp_write_cfg,
+ .wp_read_cfg = spi_wp_read_cfg,
+ .wp_get_ranges = spi_wp_get_available_ranges,
+ .decode_range = decode_range_spi25,
+ .printlock = spi_prettyprint_status_register_bp4_srwd,
+ .unlock = spi_disable_blockprotect_bp4_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2300, 3600},
+ .prepare_access = spi_prepare_io,
+ .finish_access = spi_finish_io,
+ },
+
+ {
+ .vendor = "Puya",
+ .name = "PY25Q64HA",
+ .bustype = BUS_SPI,
+ .manufacture_id = PUYA_ID,
+ .model_id = PUYA_PY25Q64H,
+ .total_size = 8192,
+ .page_size = 256,
+ /* Has configuration register that acts like third status register. */
+ .feature_bits = FEATURE_WRSR_EITHER | FEATURE_WRSR_EXT2 | FEATURE_WRSR2 | FEATURE_WRSR3 |
+ FEATURE_OTP | FEATURE_QPI_SRP,
+ .dummy_cycles = { .qpi_read_params = { 10, 4, 6, 8 } },
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 2048} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 256} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 128} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {8192 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {8192 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ },
+ },
+ .reg_bits =
+ {
+ .qe = {STATUS2, 1, RW},
+ .srp = {STATUS1, 7, RW},
+ .srl = {STATUS2, 0, RW},
+ .bp = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}},
+ .tb = {STATUS1, 5, RW},
+ .sec = {STATUS1, 6, RW},
+ .cmp = {STATUS2, 6, RW},
+ .wps = {STATUS3, 2, RW}, /* Called configuration register in datasheet. */
+ },
+ .wp_write_cfg = spi_wp_write_cfg,
+ .wp_read_cfg = spi_wp_read_cfg,
+ .wp_get_ranges = spi_wp_get_available_ranges,
+ .decode_range = decode_range_spi25,
+ .printlock = spi_prettyprint_status_register_bp4_srwd,
+ .unlock = spi_disable_blockprotect_bp4_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2700, 3600},
+ .prepare_access = spi_prepare_io,
+ .finish_access = spi_finish_io,
+ },
+
+ {
+ .vendor = "Puya",
+ .name = "PY25F64HA",
+ .bustype = BUS_SPI,
+ .manufacture_id = PUYA_ID,
+ .model_id = PUYA_PY25F64H,
+ .total_size = 8192,
+ .page_size = 256,
+ /* Has configuration register that acts like third status register. */
+ .feature_bits = FEATURE_WRSR_EITHER | FEATURE_WRSR_EXT2 | FEATURE_WRSR2 | FEATURE_WRSR3 |
+ FEATURE_OTP | FEATURE_QPI_SRP,
+ .dummy_cycles = { .qpi_read_params = { 10, 4, 6, 8 } },
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 2048} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 256} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 128} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {8192 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {8192 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ },
+ },
+ .reg_bits =
+ {
+ .qe = {STATUS2, 1, RO}, /* Fixed QE=1 */
+ .srp = {STATUS1, 7, RW},
+ .srl = {STATUS2, 0, RW},
+ .bp = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}},
+ .tb = {STATUS1, 5, RW},
+ .sec = {STATUS1, 6, RW},
+ .cmp = {STATUS2, 6, RW},
+ .wps = {STATUS3, 2, RW}, /* Called configuration register in datasheet. */
+ },
+ .wp_write_cfg = spi_wp_write_cfg,
+ .wp_read_cfg = spi_wp_read_cfg,
+ .wp_get_ranges = spi_wp_get_available_ranges,
+ .decode_range = decode_range_spi25,
+ .printlock = spi_prettyprint_status_register_bp4_srwd,
+ .unlock = spi_disable_blockprotect_bp4_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2700, 3600},
+ .prepare_access = spi_prepare_io,
+ .finish_access = spi_finish_io,
+ },
+
+ {
+ .vendor = "Puya",
+ .name = "PY25Q128HA",
+ .bustype = BUS_SPI,
+ .manufacture_id = PUYA_ID,
+ .model_id = PUYA_PY25Q128H,
+ .total_size = 16384,
+ .page_size = 256,
+ /* Has configuration register that acts like third status register. */
+ .feature_bits = FEATURE_WRSR_EITHER | FEATURE_WRSR_EXT2 | FEATURE_WRSR2 | FEATURE_WRSR3 |
+ FEATURE_OTP | FEATURE_QPI_SRP,
+ .dummy_cycles = { .qpi_read_params = { 10, 4, 6, 8 } },
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 4096} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 512} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 256} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {16384 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {16384 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ },
+ },
+ .reg_bits =
+ {
+ .qe = {STATUS2, 1, RW},
+ .srp = {STATUS1, 7, RW},
+ .srl = {STATUS2, 0, RW},
+ .bp = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}},
+ .tb = {STATUS1, 5, RW},
+ .sec = {STATUS1, 6, RW},
+ .cmp = {STATUS2, 6, RW},
+ .wps = {STATUS3, 2, RW}, /* Called configuration register in datasheet. */
+ },
+ .wp_write_cfg = spi_wp_write_cfg,
+ .wp_read_cfg = spi_wp_read_cfg,
+ .wp_get_ranges = spi_wp_get_available_ranges,
+ .decode_range = decode_range_spi25,
+ .printlock = spi_prettyprint_status_register_bp4_srwd,
+ .unlock = spi_disable_blockprotect_bp4_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2700, 3600},
+ .prepare_access = spi_prepare_io,
+ .finish_access = spi_finish_io,
+ },
+
+ {
+ .vendor = "Puya",
+ .name = "PY25F128HA/PY25R128HA",
+ .bustype = BUS_SPI,
+ .manufacture_id = PUYA_ID,
+ .model_id = PUYA_PY25F128H,
+ .total_size = 16384,
+ .page_size = 256,
+ /* Has configuration register that acts like third status register. */
+ .feature_bits = FEATURE_WRSR_EITHER | FEATURE_WRSR_EXT2 | FEATURE_WRSR2 | FEATURE_WRSR3 |
+ FEATURE_OTP | FEATURE_QPI_SRP,
+ .dummy_cycles = { .qpi_read_params = { 10, 4, 6, 8 } },
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 4096} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 512} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 256} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {16384 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {16384 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ },
+ },
+ .reg_bits =
+ {
+ .qe = {STATUS2, 1, RO}, /* Fixed QE=1 */
+ .srp = {STATUS1, 7, RW},
+ .srl = {STATUS2, 0, RW},
+ .bp = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}},
+ .tb = {STATUS1, 5, RW},
+ .sec = {STATUS1, 6, RW},
+ .cmp = {STATUS2, 6, RW},
+ .wps = {STATUS3, 2, RW}, /* Called configuration register in datasheet. */
+ },
+ .wp_write_cfg = spi_wp_write_cfg,
+ .wp_read_cfg = spi_wp_read_cfg,
+ .wp_get_ranges = spi_wp_get_available_ranges,
+ .decode_range = decode_range_spi25,
+ .printlock = spi_prettyprint_status_register_bp4_srwd,
+ .unlock = spi_disable_blockprotect_bp4_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2700, 3600},
+ .prepare_access = spi_prepare_io,
+ .finish_access = spi_finish_io,
+ },
+
+ {
.vendor = "SST",
.name = "SST25LF020A",
.bustype = BUS_SPI,
diff --git a/include/flashchips.h b/include/flashchips.h
index 1af22d6..23f56ad 100644
--- a/include/flashchips.h
+++ b/include/flashchips.h
@@ -634,6 +634,14 @@
#define PMC_PM49FL004 0x6E
#define PUYA_ID 0x85
+#define PUYA_PY25Q40H 0x2013
+#define PUYA_PY25Q80H 0x2014
+#define PUYA_PY25Q16H 0x2015
+#define PUYA_PY25Q32H 0x2016
+#define PUYA_PY25Q64H 0x2017
+#define PUYA_PY25Q128H 0x2018
+#define PUYA_PY25F64H 0x2317
+#define PUYA_PY25F128H 0x2318 /* Same as PY25R128H */
#define PUYA_P25Q06H 0x4010
#define PUYA_P25Q11H 0x4011
#define PUYA_P25Q21H 0x4012