ft2232_spi: add support for the Dangerous Prototypes Bus Blaster
Add support for the Dangerous Prototypes Bus Blaster (v1/v2).
The new model is called "busblaster".
So far only v2 has been tested, but since both v1 and v2
emulate a Amontec JTAGKEY in the default configuration,
it is assumed that v1 should work fine as well.
Information about the Busblaster can be found at:
http://dangerousprototypes.com/docs/Bus_Blaster
Corresponding to flashrom svn r1412.
Signed-off-by: Steve Markgraf <steve@steve-m.de>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
diff --git a/ft2232_spi.c b/ft2232_spi.c
index 689f276..cb247fa 100644
--- a/ft2232_spi.c
+++ b/ft2232_spi.c
@@ -173,6 +173,12 @@
ft2232_interface = INTERFACE_A;
cs_bits = 0x18;
pindir = 0x1b;
+ } else if (!strcasecmp(arg, "busblaster")) {
+ /* In its default configuration it is a jtagkey clone */
+ ft2232_type = FTDI_FT2232H_PID;
+ ft2232_interface = INTERFACE_A;
+ cs_bits = 0x18;
+ pindir = 0x1b;
} else if (!strcasecmp(arg, "openmoko")) {
ft2232_vid = FIC_VID;
ft2232_type = OPENMOKO_DBGBOARD_PID;