ft2232_spi: add support for the Dangerous Prototypes Bus Blaster
Add support for the Dangerous Prototypes Bus Blaster (v1/v2).
The new model is called "busblaster".
So far only v2 has been tested, but since both v1 and v2
emulate a Amontec JTAGKEY in the default configuration,
it is assumed that v1 should work fine as well.
Information about the Busblaster can be found at:
http://dangerousprototypes.com/docs/Bus_Blaster
Corresponding to flashrom svn r1412.
Signed-off-by: Steve Markgraf <steve@steve-m.de>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
diff --git a/flashrom.8 b/flashrom.8
index 6556609..1b9bf60 100644
--- a/flashrom.8
+++ b/flashrom.8
@@ -198,8 +198,8 @@
.BR "* ft2232_spi" " (for SPI flash ROMs attached to an FT2232/FT4232H family \
based USB SPI programmer), including the DLP Design DLP-USB1232H, \
FTDI FT2232H Mini-Module, FTDI FT4232H Mini-Module, openbiosprog-spi, Amontec \
-JTAGkey/JTAGkey-tiny/JTAGkey-2, Olimex ARM-USB-TINY/-H, and Olimex \
-ARM-USB-OCD/-H."
+JTAGkey/JTAGkey-tiny/JTAGkey-2, Dangerous Prototypes Bus Blaster, \
+Olimex ARM-USB-TINY/-H, and Olimex ARM-USB-OCD/-H."
.sp
.BR "* serprog" " (for flash ROMs attached to a programmer speaking serprog), \
including AVR flasher by Urja Rannikko, AVR flasher by eightdot, \
@@ -440,8 +440,8 @@
syntax where
.B model
can be
-.BR 2232H ", " 4232H ", " jtagkey ", " openmoko ", " arm-usb-tiny ", " \
-arm-usb-tiny-h ", " arm-usb-ocd " or " arm-usb-ocd-h
+.BR 2232H ", " 4232H ", " jtagkey ", " busblaster ", " openmoko ", " \
+arm-usb-tiny ", " arm-usb-tiny-h ", " arm-usb-ocd " or " arm-usb-ocd-h
and
.B interface
can be