Add support for Numonyx M45PE series
Add...
- M45PE10
- M45PE20
- M45PE40
- M45PE80
- M45PE16
Corresponding to flashrom svn r1686.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
diff --git a/flashchips.c b/flashchips.c
index 331ea4d..9e1f9a5 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -6699,6 +6699,141 @@
{
.vendor = "Numonyx",
+ .name = "M45PE10",
+ .bustype = BUS_SPI,
+ .manufacture_id = ST_ID,
+ .model_id = ST_M45PE10,
+ .total_size = 128,
+ .page_size = 256,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers = {
+ {
+ .eraseblocks = { {256, 512} },
+ .block_erase = spi_block_erase_db,
+ }, {
+ .eraseblocks = { {64 * 1024, 2} },
+ .block_erase = spi_block_erase_d8,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_default_welwip,
+ .unlock = NULL, /* #WP pin write-protects lower 64kB. */
+ .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */
+ .read = spi_chip_read, /* Fast read (0x0B) supported */
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "Numonyx",
+ .name = "M45PE20",
+ .bustype = BUS_SPI,
+ .manufacture_id = ST_ID,
+ .model_id = ST_M45PE20,
+ .total_size = 256,
+ .page_size = 256,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers = {
+ {
+ .eraseblocks = { {256, 1024} },
+ .block_erase = spi_block_erase_db,
+ }, {
+ .eraseblocks = { {64 * 1024, 4} },
+ .block_erase = spi_block_erase_d8,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_default_welwip,
+ .unlock = NULL, /* #WP pin write-protects lower 64kB. */
+ .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */
+ .read = spi_chip_read, /* Fast read (0x0B) supported */
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "Numonyx",
+ .name = "M45PE40",
+ .bustype = BUS_SPI,
+ .manufacture_id = ST_ID,
+ .model_id = ST_M45PE40,
+ .total_size = 512,
+ .page_size = 256,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers = {
+ {
+ .eraseblocks = { {256, 2048} },
+ .block_erase = spi_block_erase_db,
+ }, {
+ .eraseblocks = { {64 * 1024, 8} },
+ .block_erase = spi_block_erase_d8,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_default_welwip,
+ .unlock = NULL, /* #WP pin write-protects lower 64kB. */
+ .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */
+ .read = spi_chip_read, /* Fast read (0x0B) supported */
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "Numonyx",
+ .name = "M45PE80",
+ .bustype = BUS_SPI,
+ .manufacture_id = ST_ID,
+ .model_id = ST_M45PE80,
+ .total_size = 1024,
+ .page_size = 256,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers = {
+ {
+ .eraseblocks = { {256, 4096} },
+ .block_erase = spi_block_erase_db,
+ }, {
+ .eraseblocks = { {64 * 1024, 16} },
+ .block_erase = spi_block_erase_d8,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_default_welwip,
+ .unlock = NULL, /* #WP pin write-protects lower 64kB. */
+ .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */
+ .read = spi_chip_read, /* Fast read (0x0B) supported */
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "Numonyx",
+ .name = "M45PE16",
+ .bustype = BUS_SPI,
+ .manufacture_id = ST_ID,
+ .model_id = ST_M45PE16,
+ .total_size = 2048,
+ .page_size = 256,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers = {
+ {
+ .eraseblocks = { {256, 8192} },
+ .block_erase = spi_block_erase_db,
+ }, {
+ .eraseblocks = { {64 * 1024, 32} },
+ .block_erase = spi_block_erase_d8,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_default_welwip,
+ .unlock = NULL, /* #WP pin write-protects lower 64kB. */
+ .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */
+ .read = spi_chip_read, /* Fast read (0x0B) supported */
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "Numonyx",
.name = "N25Q016",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,