)]}'
{
  "commit": "0057822c6350f415a4b8d4563b0fef6d136419d4",
  "tree": "044ffe7fbe963fca4b57e049d486813f35b861ad",
  "parents": [
    "fb176d28fe456e7dad471594f5c7f58136e36b1d"
  ],
  "author": {
    "name": "Nico Huber",
    "email": "nico.h@gmx.de",
    "time": "Sat Mar 02 14:00:53 2024 +0100"
  },
  "committer": {
    "name": "Nico Huber",
    "email": "nico.h@gmx.de",
    "time": "Mon Mar 25 21:53:29 2024 +0000"
  },
  "message": "dediprog: Add protocol detection for SF700 \u0026 SF600Plus-G2\n\nThe short-lived SF700 was not tested but is treated the same as an\nSF600Plus-G2 by `dpcmd\u0027.  Both programmers have their own firmware\nversioning:  For the SF700, only clues about firmware versions 4.x\nwere found. The SF600Plus-G2 seems to start anew from version 1.x.\n\nGiven that the SF700 was introduced in 2019 [1], after support for\nthe current protocol was added to flashrom in commit f73f8a732f8fd\n(dediprog: implement command spec for firmware \u003e\u003d 7.2.30), it most\nlikely never supported any older protocol version.\n\nTested with \"SF600PG2. V:01.01.012 HW:01.00\", \"V:01.01.006 HW:01.00\".\n\n[1] https://www.dediprog.com/news/show?id\u003d196\n\nChange-Id: I8d2c9612e422cedbf91b42432b1832abaaf95c62\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.sourcearcade.org/c/flashprog/+/94\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "c7b4ae8edf246c08c71dd3c853df1d15fd9cfd94",
      "old_mode": 33188,
      "old_path": "dediprog.c",
      "new_id": "52161f1831973cdd2727b8eb738339c0cb2e05a1",
      "new_mode": 33188,
      "new_path": "dediprog.c"
    }
  ]
}